|
|
|
| Stainless Steel Wire Rods |
 |
|
|
|
| |
We stock Stainless Steel, carbon and alloy specialty steels supplied in the as rolled, annealed and normalized conditions. We offer cut to size and heat treatment through our service centre.
We also stock flat, Hexagon, Triangle Bar, Square, Half Round products in various dimensions and grades.We offer a speedy delivery service in order to get your products to you on time.
User Industries:
Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal.
Product Range:
The following table represents size range, product standards and material grades of Round Bars |
| |
| Diameter (Size) |
Thick / Medium Wire - 1mm to 8mm (0.039" to 0.314")
Fine Wire - 0.1mm to 0.9mm (0.004" to 0.035") |
| Grades |
201,
202, 302, 302HQ, 303, 304, 304L, 304Hc, 310, 316, 316L, 316Ti, 321,
304LER, 308LER, 309LER, 316LER, 410, 416, 430, 430L, 430F |
| Surface finish |
Matt, Bright drawn, Bright Shiny, EPQ, Coated, De-coated |
| Diameter |
Diameter |
Tolerance |
| |
0.10 mm (0.0039") to<0.20 mm (0.0078")
0.20 mm (0.0078") to < 0.30 mm (0.0118")
0.30 mm (0.0118") to < 0.80 mm (0.0314")
0.80 mm (0.0314") to < 0.50 mm (0.0590")
1.50 mm (0.0590") to < 2.00 mm (0.0787")
2.00 mm (0.0787") to < 4.00 mm (0.1574")
4.00 mm (0.1574") to < 8.00 mm (0.3149")
|
+/- 0.005 mm (0.0002")
+/- 0.008 mm (0.0003")
+/- 0.010 mm (0.0004")
+/- 0.013 mm (0.0005")
+/- 0.015 mm (0.0006")
+/- 0.025 mm (0.0009")
+/- 0.030 mm (0.0011") |
| Tensile Strength |
Type |
Tensile in kg / mm2 |
| |
Soft
1/4 Hard
1/2 Hard
Full Hard |
60 - 75
75 - 90
90 - 140
140 - 200 or ASTM A 313 / DIN 17224 |
| Packing |
- HDPE Wrapped coils of 20 kg to 250 kg
- Pattern laid coils on MS Carriers / spiders (200 kg to 1000 kg)
- Coils on wooden pallets (100 kg to 800 kg)
- Cheese coils (500 kg - 1000 kg)
- Drum Packing
- Fine wire in Spools from Din 80 to Din 250 |
Stainless Steel Cold Heading Wires |
|
| Condition |
Cold drawn, Annealed and Pickled |
| Diameter (Size) |
1.6 mm to 17 mm (1/16" to 11/16") |
| Diameter Tolerance |
+/- 0.050 mm |
| Tensile Strength |
65 kg / mm2 max |
| Packing |
HDPE Wrapped coils of 300 kg to 500 kg |
| Grades |
304, 304L, 316, 316L, 304HC, 302HQ |
|
|
|
|
| |
| |
|
|
