Tri-Clover Fittings
TC BEND,TC TEE, TC REDUCER, TC UNION,TC CLAMPS, TC LINER (FERRULES) , TRI-CLOVER STANDARD FITTINGS IS WIDELY USED IN PHARMACEUTICALS & FOOD INDUSTRIES FOR ITS EASILY OPENING & CLEANING FACILITIES. IT CONSISTS OF TWO LINERS (FERRULES) & CLAMPS WHICH HOLDS BOTH THE LINES TOGETHER. GASKET IS HOUSED BETWEEN THE LINES TO GIVE LEAK PROOF SEALING.
RANGE : ½” (15 MM) TO 12” (300 MM) (SUITABLE FOR OD & NB SIZE PIPE)
GRADE : AISI 304, 316, 316L
FINISH POLISHED : ELECTRO POLISHED, 320 GRIT
Tri Clover Clamp and TC Ferrule in specific dimensions and Size
Tri Clamp Fittings
Tri Clover Clamp Fittings
Tri Clover Ferrule
Check Tri Clamp Groove Dimensions, Weight Chart and Drawing
| Pipe Outer Diameter in A | Flange Outer Diameter B | Pipe Inner Diameter C |
| 1 | 1.98 | .87 |
| 1.5 | 1.98 | 1.37 |
| 2 | 2.52 | 1.87 |
| 2.5 | 3.05 | 2.37 |
| 3 | 3.58 | 2.87 |
| 4 | 4.68 | 3.83 |
| 6 | 6.57 | 5.78 |
| 8 | 8.57 | 7.78 |
| 10 | 10.57 | 9.69 |
| 12 | 12.57 | 11.81 |
 Tri Clamp Fittings |  Tri Clamp Flanges |  Tri Clamp Ferrules |
- Working principle: Can be welded on the pipeline and adjust the flow qty in the pipe line.
- Medium: Beer, Pharmacy, Dairy, Beverage
- Material of valve: AISI304, AISI304L, AISI316, AISI316L.
- Standard: SMS, DIN, 3A.
- Flux domination of pipeline: DN10-DN200&1/4″-6″, applied to the SS pipeline system.
We Guarantee Fastest Delivery of Tc Clamp, get online Certified & Tested Tri Clamp Ferrule
| Tube OD | Flange OD | Size |
| 1/2 | 0.984 | 3/4 |
| 3/4 | 0.984 | 3/4 |
| 1 | 1.984 | 1.5 |
| 1.5 | 1.984 | 1.5 |
| 2 | 2.516 | 2 |
| 2.5 | 3.047 | 2.5 |
| 3 | 3.579 | 3 |
| 4 | 4.682 | 4 |
| Maximum Clamp Pressure Ratings (PSI) | |||||||
| Single Hinge (13MHM) | Double Hinge (13MHHM-DP) | High Pressure (13MHP) | |||||
| Size | 70F | 250F | 70F | 250F | 70F | 250F | Max Torque |
| 3/4 in. | 1500 | 1200 | 1500 | 1200 | 1500 | 1200 | 130 In LBf |
| 1.5 in. | 500 | 250 | 500 | 250 | 1500 | 1200 | 130 In LBf |
| 2 in. | 450 | 250 | 450 | 250 | 1000 | 800 | 130 In LBf |
| 2.5 in. | 400 | 200 | 400 | 200 | 1000 | 800 | 130 In LBf |
| 3 in. | 350 | 150 | 350 | 150 | 1000 | 800 | 130 In LBf |
| 4 in. | 200 | 125 | 200 | 125 | 800 | 600 | 200 In LBf |
| 6 in. | 150 | 75 | 300 | 200 | 200 In LBf | ||
| 8 in. | 100 | 50 | 250 | 150 | 200 In LBf | ||
| 10 in. | 40 | 30 | 200 | 125 | 200 In LBf | ||
| 12 in. | 30 | 25 | 150 | 100 | 200 In LBf | ||
Call for small piece of Tri Clover Fittings to test before buying
| Tri-Clamp Gasket Size | OD of Gasket | ID of Gasket |
|---|---|---|
| 1/2″ | 0.992 | 0.370 |
| 3/4″ | 0.992 | 0.620 |
| 1″ | 1.984 | 0.870 |
| 1 1/2″ | 1.984 | 1.370 |
| 2″ | 2.516 | 1.870 |
| 2 1/2″ | 3.047 | 2.370 |
| 3″ | 3.579 | 2.870 |
| 4″ | 4.682 | 3.834 |
| 6″ | 6.562 | 5.782 |
| 8″ | 8.602 | 7.782 |
| 10″ | 10.570 | 9.782 |
| 12″ | 12.570 | 11.760 |
| Size (mm) | A (mm) | B (mm) | C (mm) | D (mm) |
|---|---|---|---|---|
| 12.7 | 25.1 | 20.0 | 9.5 | 21 |
| 19.1 | 25.1 | 20.0 | 15.9 | 21 |
| 25.4 | 50.5 | 43.5 | 22.2 | 21 |
| 31.8 | 50.5 | 43.5 | 28.6 | 21 |
| 38.1 | 50.5 | 43.5 | 34.9 | 21 |
| 50.8 | 64.0 | 56.5 | 47.6 | 21 |
| 63.5 | 77.5 | 70.5 | 60.3 | 21 |
| 76.2 | 91.0 | 83.5 | 73 | 21 |
| 101.6 | 119.0 | 110.0 | 98.4 | 21 |
| 152.4 | 166.1 | 157.0 | 148.4 | 27 |
| 203.2 | 217.5 | 207.2 | 199.2 | 29 |
| 254 | 268.5 | – | 250 | 29 |
| 304.8 | 319.5 | 308.8 | 300.8 | 29 |
| Indonesia, Dammam -KSA, Philippines, Belgium | Stainless Steel Sanitary Tri Clamp Hose Adaptor/Reducer/Tee/Elbow Sanitary 3A Pipe Fittings |
| France, Qatar, Europe, Thailand | Hygienic Stainless Steel Tri Clamp Rebreather Pipe Fitting |
| Germany, Czechia, Thailand, Malaysia | Stainless Steel SS304 Tri Clamp Spool Fitting for Extractor |
| USA, Malaysia, Bangladesh, Finland | Stainless Steel Sanitary Food Tri-Clamp Manifold Fitting with Ports Valve (JN-FT 1018) |
| Saudi Arabia (KSA), South Africa, Kuwait, Brazil | 90 Degree Tri-Clamp Stainless Steel Elbow Pipe Fitting |
| South Africa, Bahrain, Singapore | Sanitary Stainless Steel Tri-Clamp Pipe Tube Fitting |
| Australia, Philippines, UK, Nigeria | Stainless Steel Food Processing 2CMP Tri Clamp 45D Elbow Pipe Fitting |
| Malaysia, Oman, Hong Kong, UAE | Stainless Steel Pipe Fitting Tri Clamp Hose Barb Fitting |
| Italy, Chile, Iran, Singapore | Stainless Steel Sanitary Long Ferrule Tri-Clamp Fitting |
| Turkey, United Arab Emirates (UAE), Norway, Malaysia | Stainless Steel Hydraulic Tri Clamp Hose Adaptor/Reducer/Tee/Elbow Sanitary 3A Pipe Fittings |
| Malaysia, Netherlands, Russia, Dubai | Food Grade Sanitary Stainless Steel Tri Clamp Ferrule Pipe Fittings |
| Spain, Egypt, Mexico, UK | Sanitary Stainless Steel Lined Tri Clamp Hose Fitting for Pharmacy Lining Fittings |
| Europe, United Kingdom -UK, Malaysia, UAE | Sanitary Stainless Steel Tri Clamp Fitting |
| Canada, UK, Poland, Ellington -United States | 13sf High Quality Sanitary Double Pin Tri Clamp Stainless Steel Fitting |
| Malaysia, Philippines, Canada, Singapore | Stainless Steel Sanitary Tri-Clamp Fittings |
| Japan, Europe, Romania, Malaysia | 3A, SMS, DIN, Bpe Sanitary Stainless Steel Tri Clamp Ferrule Fittings |
| Colombia, Sweden, Malaysia, China | Sanitary Stainless Steel Tri-Clamp Pipe Tube Fitting |
| Taiwan, Malaysia, Los Alamos -Mexico, Philippines | Tri Clamp Elbow Stainless Steel Pipe Fitting |
| South Korea, Singapore, NY 12203 (USA), Malaysia | Sanitary Stainless Steel Tri-Clamp Concentric/Eccentric Reducer Pipe Fittings |
| Connection for Sanitary OD-Tubing | |||
| OD Outer Diameter (Inches) | ID Inner Diameter (Inches) | Wall Thickness (Inches/Gauge) | A Ferrule Face (Inches) |
| ½ | 0.37 | 0.065 / 16 ga. | 0.984 |
| ¾ | 0.62 | 0.065 / 16 ga. | 0.984 |
| 1 | 0.87 | 0.065 / 16 ga. | 1.984 |
| 1½ | 1.37 | 0.065 / 16 ga. | 1.984 |
| 2 | 1.87 | 0.065 / 16 ga. | 2.516 |
| 2½ | 2.37 | 0.065 / 16 ga. | 3.047 |
| 3 | 2.87 | 0.065 / 16 ga. | 3.579 |
| 4 | 3.87 | 0.083 / 14 ga. | 4.682 |
| HS Code | Description |
|---|---|
| 73072900 | STAINLESS STEEL, 1-1/2 INCH SANITARY FITTING (TRI-CLAMP TYPE), ACCOMMODATES UP TO 18 THERMOCOUPLES (SUPP. MFGR. M/S. SPL |
| 39269099 | FMB116244, FLEXEL PALLETANK MAGNETIC MIXER 1500L (TPE) FMB116244 FITTING MAGNETIC MIXER BAG 4 TRI-CLAMP 1 1/2 TRI-CL |
| 73079990 | Y TYPE TRI CLAMP ELBOW (SIZE-1.5 MATERIAL-SS304-STAINLESSTEEL FITTING ) |
| 73071900 | 193427 : FITTING, TRI-CLAMP 1 1/2 X 1 1/4 (SPARE PARTS FOR SPRAY EQUIPMENT) (C.O.O.USA) |
| 73071900 | 193426 : FITTING, TRI-CLAMP 1 1/2 X 1 1/2 (SPARE PARTS FOR SPRAY EQUIPMENT) (C.O.O.USA) |
| 40169310 | FITTING TRI CLAMP GASKET 4 VITON |
| 40169310 | FITTING TRI CLAMP GASKET 4 CLAMP GYLON |
| 40169310 | FITTING TRI CLAMP GASKET 4 SILICONE |
| 73182990 | STAINLESS STEEL FITTINGS (TRI COVER CLAMP 38.1MM) (1000 NOS) |
| 73182990 | STAINLESS STEEL FITTINGS (TRI COVER CLAMP 50.8MM) (50 NOS) |
| 90181990 | 21412002 TRI CLAMP FITTING 1 NW 40 |
Also known as Tri-Clamp fittings, our Tri-Clover fittings and valves are manufactured using high grade 304 stainless steel. Tri clamp fittings are primarily preferred for use in commercial breweries, dairy farms, and other food/beverage industries with sanitation standards that need to be met. Both tri-clamp fittings and valves are designed with cleaning in mind. The simplicity in design, and lack of crevices, prevent bacteria and other germs being left behind after regular cleaning.
Sizing a Tri-Clover Fitting
This can be tricky as a lot of people measure the ferrule flange end which gives an oversized result. The fitting is actually sized on the OD of the Tube. Please see the chart below for the size of the ferrule flanged end compared to the Tube OD so that you can choose the correct size. Please note the 1/2″ and 3/4″ have the same size ferule flange end and so do the 1″ and 1.5″. Both these sizes will use the same sized clamps, caps and ferrule flange ends.
Tri-Clover (TC) Clamp Sizing Chart:
How do you make a Tri-Clover Connection?
In order to make a Tri-Clamp/Tri-Clover connection you need the following:
- One Tri-Clover Clamp,
- Two TC Fittings (often called Ferrule or Flange ends)
- And a TC gasket.
- ● Every connection together is held together by a TC Clamp.
- ● The two ferrule/flange TC ends connect face to face,
- ● with a gasket in between ensuring a seal.
The two face to face TC ferrules/flanges are covered by a TC Clamp and as one tightens the clamp, it compresses the two flanges to seal on the gasket. The Clamps wing tighten and loosen by means of a wing nut.
The TC fittings used in a sanitary connection can be any combination of two Tri-Clamp end connections like a Ferrule, a Tri-Clover by thread or Hose barb, a Tri-Clover valve, and so forth…
Silicone gaskets are the most suitable gasket for food and beverage applications, including for home brew. They are heat resistant and form a great seal due to their elasticity.
We also carry the EPDM and Teflon (PTFE) gaskets. Teflon has a high tolerance for heat and also for chemically resistance.
Our experts manufactured this Tri Clover Fitings Canada by making use of superior quality material and high-end technology so as to maintain the set industry standards. This product provided by us is manufactured using the finest quality raw material as well the latest technology by our adroit professionals. The offered product is scrupulously tested on different quality parameters and is extensively demanded in different industries. Following are some of the best features of this product, such as higher strength, precisely designed, low prices, and more.
We are the leading Tri Clover Fittings manufacturers, Tri Clover Fittings Suppliers, Tri Clover Fittings Manufacturers Australia, South Africa, Brisbane, UK, Canada, Sydney & worldwide. We mainly export Stainless Steel Tri clover fittings, Tri clover clamp. We have a variety of styles available in a range of sizes, to ensure you get the perfect tri clover fittings.
Stainless Steel Tri-clamp or Tri-clover Hygienic fittings
Stainless steel Tri-clamp fittings are a sanitary and clamped connection for the hygienic tubes. Often used in commercial brewery and winery applications, they are connections sealed usually by an EPDM seal. Union components in contact with products such as ferrules and blanks are made of grade 316/316L stainless steel whilst external parts such as clamps are made of grade 304/304L stainless steel.
What Is Tri Clover Fittings?
Before we get into the basics of Tri Clover Fittings Australia, I wanted to discuss some of the terminologies you may hear in the food & beverage industry regarding these types of fittings. Tri Clover Fittings Ireland is simply a branded name for tri-clamp fittings. They are compatible with one another and can be used interchangeably. Tri Clover Fittings UK provide a safe secure way to connect any food Grade system. Also known as Tri-Clover Sanitary Fittings, these Brewery Fittings and Hardware are widely used in the food and beverage industry particularly in Breweries, Wineries, and Dairies.
manufactures & supplier of Tri Clover Fittings South Africa which are widely used in the commercial food processing industries. Stainless steel Tri Clover Pipe Fittings are very easy to clean since there are no pockets, nooks or crannies and they don’t leak. SS Tri Clover Pipe Fittings can be found in dairies, soft drink plants, wineries and of course: breweries. Stainless Tri Clover Pipe Fittings allow for pipe and tubing connections to be made in a sanitary fashion that is designed to be “Cleaned-in-Place” (CIP) but is easily broken down for further cleaning, inspection and repair. Stainless Tri Clover Fittings Brisbane offers great heat resistance and is soft so it forms a seal very easily. Also known as Stainless Steel Sanitary Fittings, these are mainly used in aerospace industry for aerospace structural components.
The quality of Tri Clover Fittings offered by us is high in demands in the national and international market. Anodized finishes are used on Stainless Steel Tri Clover Fittings to increase the thickness of the oxide layer, creating a thicker barrier between the atmosphere and SS base metal. Tri Clover Pipe Fittings Sydney are basically used for changing the route of liquid material. In new construction, it has been found in many cases to be a technically adequate and much less costly substitute for nickel based alloys and titanium. These Tri Clover Fittings Perth can also be supplied in cut to length sizes and also machined or fabricated to meet your custom piping requirements.
Tri Clover Clamp Used For Various Application Industries
- Aseptic Pouch Felling Machine
- Milk Pasteurizer Machine
- Ice Cream Fridger
- Packing Machine
- Dahi Felling Machine
- Cip And Milk Reception
- Floveyor
- Uht Machine
- Milk Pasteurizer
- Distillation Machinery
- Vacuum Tray Dryer
- Cross Flow
- Pressure Leaf Filter
- Spray And Dry
Other Industries Also We Serve
Pharmaceutical, Food Industries, Thermax Plant, Water purifier, Gas lines, Chemical, Petrol and Chemical, Hi purity Plants and other construction area.